Ossur Rebound ROM Long Knee Wrap Brace

Ideal for ACL, PCL and MCL instabilities, the Ossur Rebound ROM Long Knee Wrap Brace compresses and restricts movement in the knee. This hinged support features highly breathable material for enhanced comfort, as well as removeable straps for easy application.

What's Included?

• 1 x Knee Wrap
• 1 x Set of User Instructions

Key Features and Benefits

• Highly breathable Aerospacer material reduces heat retention and improves comfort
• Low profile hinges and malleable arms for custom fit and control
• Contoured fabric reduces irritation and bulging, whilst enhancing comfort
• Removable straps allow application from right or left side
• Strap pull tab allows for consistent donning and doffing
• Unique Cooltech technology for quick drying and breathability

Which Size Is Right for Me?

This knee brace is available in a range of sizes to suit most users. Simply measure your thigh circumference (15cm above the mid-patella) and compare with the table below. Then, select your desired size from the drop-down menu at the top of the page.

Who Can Use the Rebound ROM Long Knee Wrap?

The Rebound Hinged Knee Brace is designed to compress and protect the knee area, ideal for the following conditions:

• Mild to moderate ACL, PCL, LCL or MCL instabilities
• Sprains and strains

Why Should I Choose the Long ROM Wrap?

This purchase includes the long version of the Ossur knee wrap, which features five straps as shown in the image. This offers more restriction to stabilise and support the knee. If you'd prefer a shorter brace with less restriction (two straps), you can a short version is also available.

Is This Ossur Rebound Brace Comfortable?

This wraparound brace is designed with highly breathable Aerospacer material that reduces heat retention and improves comfort. The contoured, pre-tensed inset fabric further enhances comfort by reducing irritation and preventing bulging in the popliteal area (back of the knee).

Does the Rebound ROM Wrap Brace Have a Good Fit?

The Ossur Rebound ROM Knee Wrap is constructed with low-profile hinges with extension and flexion stop kit options, as well as malleable arms. These offer a more customised fit plus better knee movement control.

How Do I Apply the Rebound Wraparound Knee Support?

Follow the instructions below for best results during the application of this device.

1. Open the softgood and place behind the knee (Figure 1).
2. Wrap the softgood around the leg (lower portion first) and fasten firmly with the contact closures (Figure 2).
3. The patella opening should be centred over the patella.

Can I Adjust the Range of Motion (ROM)?

Adjustment should be performed by a healthcare professional. The brace comes with 10º extension stops attached to the hinges. If needed, ROM control can be adjusted using the extension (0°, 5°, 10°, 20°, 30° and 40°) and flexion (0°, 45°, 60°, 75° and 90°) stops included with the brace.

How Do I Adjust the ROM?

Follow the instructions below to discover how best to adjust the ROM.

1. Remove the extension stop retaining screws. Using a screwdriver or a pen, slide the 10º stop out of the hinge on both sides.
2. Reapply the desired extension stop and gently secure it with the retaining screw. Do not overtighten.
3. Follow the same procedure for the addition of a flexion stop.

Washing Instructions

Remove the hinges and close all hook/loop fasteners before washing. Hand wash using 30ºC soapy water. Rinse thoroughly and line dry only. For best results, rinse after every use. 

Technical Specifications

• Materials: Nylon, Elastane/Spandex, Nylon, Polyester