Rolyan Aquaplast-T Watercolours Red 2.4mm Splinting Material

The Rolyan Aquaplast-T Watercolours Red 2.4mm Splinting Material is a coated thermoplastic splinting material with a controlled stretch that shapes easily. With 100% memory allowing for re-moulding and splint revision, the Aquaplast-T Watercolours Splinting Material can reduce waste for less experienced therapists.

The Rolyan Aquaplast-T Watercolours Splinting Material is available in an array of vibrant colours to encourage paediatric and adult compliance. This particular version is Red.

Reduced Bulkiness

At 2.4mm thick, this product provides moderate support with reduced weight and bulkiness. This makes it perfect for a wide range of static, dynamic or progressive splints where less weight is desired, such as arthritis, thumb, hand, wrist and small area splints.

Available Versions of the Rolyan Aquaplast-T Watercolours Red

The Rolyan Aquaplast-T Watercolours Red 2.4mm Splinting Material is available with two different types of perforation:

• Solid: For maximum rigidity
• OptiPerf 19%: Provides superior ventilation for comfort while maintaining material strength and easy edge finishing

Handling Characteristics of the Rolyan Aquaplast-T Watercolours 2.4mm

• Bright, vibrant colours encourage paediatric and adult compliance
• The optimum combination of intimate conformability and resistant stretch
• Features 100% memory allowing repeated reheating and economical splint revisions
• Edges trim easily

Clinical Recommendations of the Rolyan Aquaplast-T Watercolours

The Rolyan Aquaplast-T Watercolours is recommended for a number of clinical applications, including:

• Finger and hand splints requiring breathability
• Hand and upper limb splints
• Neurological, visual and attentional deficits
• Occupational splints where conventional white materials can show stains

Bonding of the Rolyan Aquaplast-T Watercolours Splinting Material

The Rolyan Aquaplast-T Watercolours Red 2.4mm Splinting Material should be heated for 1 minute in water at 70° - 75°C for 2 - 3 minutes of working time.

• For a temporary bond, pinch heated surfaces together
• For a permanent bond, remove the coating with spirits or by safely scraping with a sharp instrument

Pack Sizing of the Rolyan Aquaplast-T Watercolours Thermoplastic Splinting Material

The Rolyan Aquaplast-T Watercolours Red 2.4mm Splinting Material is supplied in single thermoplastic sheets measuring 46 x 61cm.

Disclaimer: This particular version of the Aquaplast-T Watercolours is supplied in red, though the images above display a variety of different colours which are available in the range.