Signolux Alarmo 2 Detector for Smoke Alarms

The Signolux Alarmo 2 Detector for Smoke Alarms works to detect the alarm sounds from existing smoke alarms without the need for any modification or wiring, alerting deaf or impaired users to a fire. A great addition to any Signolux system, the Signolux Alarmo 2 helps to make any existing smoke alarms suitable for the hard of hearing/deaf users.

Please Note: The Alarmo 2 must be paired with a Signolux receiver (purchased separately) to send out an alert to the user.

What's Included?

• 1 x Transmitter
• 3 x Re-chargeable batteries

Key Features and Benefits

• Detector for smoke alarms alerts deaf or hearing impaired users of smoke alarm sounds
• Detects alarm sounds from all existing smoke alarms without wires or modification
• Highly-intelligent processor is accurate and with reduced risk of creating 'false alerts'
• Wall-mountable design and no maintenance required
• Designed for use with all Signolux receivers/systems
• Re-chargeable batteries included

Is the Alarmo 2 A Smoke Detector for the Hearing Impaired?

No, the Alarmo 2 is not a smoke detector, but a detector for smoke alarms. The transmitter is able to detect alarm sounds from existing smoke alarm detectors at home and when paired with any Signolux receiver within range, will then alert a hearing impaired/deaf user to the event.

How Does The Transmitter Work?

When an independent alarm sound is detected, the Alarmo 2 transmits a radio signal to any Signolux receiver within range, which will then alert the deaf user to the event. The Alarmo analyses the noises within its environment for sounds typical of smoke detectors and similar alarm systems.

Please Note: In order to assist this function, the Alarmo 2 should be placed as close as possible to the sound source of the alarm, which is to be monitored (e. g. on a wall close to a smoke detector).

Do I Need To Connect The Transmitter to My Smoke Alarm?

No, the Alarmo detects the alarm sounds from existing smoke alarms without the need for any modification or wiring. The transmitter has been developed and tested to detect typical alarm sounds without the need for wires.

Is the Transmitter Reliable?

For hearing impaired users being alerted about a fire in the home is vital, and becomes a matter of life and death more so than usual. Ensuring reliability the Alarmo 2 incorporates a highly intelligent processor to listen for typical smoke alarm sounds, and has been tested by utilising many different types of alarm tones. It is also extremely good at not creating false alerts, preventing false alarms and scaring the hearing impaired/deaf user.

Technical Specifications

• Power supply: 7.5 V-power supply unit on 110 - 230 V, 50-60 Hz, power backup by 3 rechargeable batteries 1,2V
• Re-chargeable battery standby: approx. 16 hours
• Frequency: 868,35 MHz (915 MHz in according export countries)
• Temperature range: 0° C – 40° C
• Detection LED: 1 red LED
• Microphone status LED: 1 red LED
• Transmission status LED: 1 red LED
• Battery status LED: 1 red/green LED
• Height: 95 mm
• Width: 112 mm
• Depth: 38 mm
• Weight: 320 g (including batteries)

Downloads

• Instructions/Manual