LHD27 Rubber 13" Gloves

The LHD27 Rubber 13" Gloves are chemically toughened for good resistance to dilute acids and alkalis. The LHD27 Rubber 13" Gloves have a slip resistant pattern on the palm and fingertips to provide improved grip.

The LHD27 Rubber 13" Gloves have a soft cotton flock lining which absorbs moisture.

CLEANING/MAINTENANCE

Both new and used gloves should be thoroughly inspected before being worn to ensure no damage is present. Gloves should not be left in a contaminated condition if reuse is intended in which case gloves should be cleaned as far as possible. Gloves may be washed with mild detergent then rinsed with clean water and allowed to dry, ideally with some air movement.

Care should be taken when removing gloves to avoid any contaminant contacting bare skin.

STORAGE

Gloves should be ideally stored in cool dry conditions in the original package and out of direct sunlight.

OBSOLESCENCE

When stored as recommended will not suffer change in mechanical properties for up to 5 years from the date of manufacture. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for the intended use.

GENERAL

None of the materials or processes used in the manufacture of these products are known to be harmful to the wearer.

PLEASE NOTE

The results of physical tests should help in glove selection, however it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the end user and not the manufacturer to determine glove suitability for the intended use.

Conformity Statement