Medpage UCP10T Cordless Chair Occupancy Sensor Pad with Alarm Transmitter

Greatly reduce the risk of a harmful fall with the Medpage UC10T Cordless Chair Occupancy Sensor Pad with Integral Alarm Transmitter. When placed under a cushion or cover, it sends an instant notification when someone rises from their chair. The transmitter is also wireless, making it easier to use discreetly and comfortably.

What's Included?

• 1 x Chair Occupancy Sensor Pad (UCP10T)

Please note that to use this Sensor Pad, a Medpage Alarm Receiver or Pager is required and neither of these things are included. For a more comprehensive falls monitoring system it can be used with both. For full details see the What is the Medpage UC10T Sensor Pad Compatible With? section below.

Key Features and Benefits

• Rapid alert to a person leaving their chair, helping to prevent falls and wandering
• Completely wireless use reduces trip risks
• Suitable for both single or multiple patient care
• Low battery warning prevents your running out of power
• Made from an antimicrobial material for exceptional hygiene
• Air valve technology for fast sensor compression, providing even quicker alerts
• Compatible with all Medpage cordless sensors
• Can be used in conjunction with bed, floor and door sensors for a complete care solution

What is the Medpage UC10T Sensor Pad Compatible With?

The Medpage UC10T Cordless Chair Occupancy Replacement Sensor Pad With Integral Alarm Transmitter cannot be used on its own. It requires Medpage alarm receiver or pager for a basic system.

For a more comprehensive one, the Sensor Pad can be used with both a receiver and pager. Below are some compatible products we offer at Health and Care:

• Medpage MPCSA11 Patient Bed and Chair Falls Monitoring Wireless Alarm Controller
• Medpage PAG-11c Alarm Pager With LCD Caller Display
• Tumblecare TUMPAG31 3-Channel Caregiver Radio Pager with tone & vibration alert
• Medpage Bed and Chair Exit Monitoring Alarm System
• Tumblecare Pressure Mat and Pager Set

Wireless Use

The UCP10T Sensor Pad is completely wireless, making for a discreet and unobtrusive design. The lack of wires also helps to prevent trip hazards, preventing potentially harmful falls.

How Does The Medpage Chair Occupancy Sensor Pad Work?

The Medpage Occupancy Sensor comes with an instruction manual but here is a quick three-step guide to using it: 

1. Pair the occupancy sensor pad to an alarm receiver or pager (please note one of these is not included)
2. Place it under a seat cover or cushion
3. If the patient rises from the seat, the sensor will send a signal to the receiver 

Technical Specifications

• Sensor dimensions: 380 x 300mm
• Module dimensions: 67 x 55 x 10mm
• Integral moulded pocket for transmitter storage
• On/Off Switch for power (Requires removal from pouch)
• Bed/Chair sensor type switch
• Operating radio frequency: 433MHz
• Wireless operating range: 50-75M
• Connection via mini-USB female socket
• Low battery warning transmission
• Test confirmation LED (when removed from pocket)