Primo Stimulation Multidyne 970 Therapy Unit

Brand

Primo

Model

£1,699.99+ FREE UK delivery

Includes 20% VATPrice exc. VAT: £1,416.66

This item in brief:

EMS interferential device
For stimulation therapy
Intuitive to use
Easy to wipe clean

Product Details

Primo Stimulation Multidyne 970 Therapy Unit

The Primo Stimulation Multidyne 970 Therapy Unit provides all low and medium frequency outputs from one unit. Stimulation therapy is used for rehabilitation purposes, preventing muscle atrophy caused by musculoskeletal injuries, such as damage to bones, joints, muscles, ligaments and tendons.

What's Included?

Your purchase of the Primo Stimulation Multidyne 970 Therapy Unit will include the following:

1 x Primo Multudyne 970 Therapy Unit
1 x Two pole patient lead
1 x Four pole patient lead
4 x Medium rubber electrodes (100 x 70m)
4 x Medium sponge covers
4 x Electrode connection cables (blue and yellow)
2 x Stretch bandages (1200 x 75mm)

New, More Reliable ODU Connector

Recently, Primo have updated their range to use ODU connectors, which are far more reliable than the old DIN connectors previously used in their machines. ODU connectors improve the connectivity of various transducers and stim cables, ensuring your machine operates to its potential without the threat of outages or stuttering faults.

What Is Interferential Therapy?

Interferential therapy applies medium frequency currents in a 2 or 4 pole configuration to produce low-frequency stimulation. Normal human skin has relatively high impedance at these frequencies, so traditionally a larger voltage had to be used to achieve the desired current, resulting in a more uncomfortable treatment for the patient. Interferential therapy overcomes the problem of skin impedance by increasing the frequency of the signal from 50Hz to around 4000Hz, and since skin impedance is much lower at this frequency, a much lower voltage signal can be used to acheive the same current, significantly reducing discomfort.

This frequency is, however, much too high to produce a stimulation effect in biological material (it should be between 0.1Hz and 250Hz). To produce the desired effect, two medium frequency signals are used, such as 4000Hz and 3900Hz. These two frequencies ‘interfere’ with one another and it is the difference between these two frequencies (amplitude modulation frequency) which produces the stimulation effect required for interferetial therapy.

Features of the Primo Stimulation Multidyne 970 Therapy Unit:

Touch screen technology – accompanies an intuitive user interface
Comprehensive treatment protocols – include interferential (2- and 4-pole), Russian, diadynamic, TENS, sinusoidal, faradic, galvanic, interrupted galvanic, trabert, medi-wave, microcurrent and S/D curve
Three carrier frequencies – 2kHz, 4kHz and 8kHz
Variable modes – 0 to 100mA peak constant current or 0 to 70/140V peak constant voltage
Two independent output channels – allow two different treatments
Can be integrated into diverse care – operates in conjunction with the EMS vacuum unit if required
Easy wipe design – reduces the risk of cross-infection
Mains powered as standard – for reliable device performance (optional battery also available)

What Treatment Protocols Are Available for the Primo Stimulation Multidyne 970 Therapy Unit?

This device comes pre-programmed with protocols for the treatment of these conditions:

Pain relief
Oedema
Stimulate local blood flow
OA Knee
Chronic low back pain
Acute low back pain
Fibromyalgia
Trigger points
Post operative knee pain
Fracture healing
Stress incontinence
Urge incontinence
Constipation (children)

Seamless Portable Charging Option

A must have accessory for your EMS machine is a portable charger. Allowing you to maintain full charge on ultrasound and stimulation modes respectively for up to 3 hours, the Primo Lightweight 60W EMS Ultrasound Machine Battery ensures your machine stays fully charged.