Bristol Maid Cylinder Wall Brackets for J Cylinders

Combining safety and convenience, the Bristol Maid Cylinder Wall Brackets for J Cylinders offer a practical solution to storing J-sized cylinders. With a simple design and secure chain, cylinders can be stored in practical locations near the sources of requirement.

Supporting the Cylinders

The Cylinder Wall Brackets provide room for two cylinders, each with a maximum diameter of 235mm. It is designed to securely hold J cylinders, with a drop-over chain to hold the cylinders in place. This ensures that the cylinders cannot be knocked over or disrupted, providing a practical alternative to positioning the cylinders on the floor or other surface without any support.

Using the Brackets

The Wall Brackets feature fixing holes on the rear of the plate. They enable the brackets to be affixed securely to a wall in a location convenient for the use of the cylinder. This helps to ensure that the cylinders can be within reach in case of emergency or immediate necessity. 

It is advised that the brackets should be positioned on the wall at approximately half the height of the cylinder. This will allow for a safer storage solution for the cylinders.

Technical Specifications of the Cylinder Wall Brackets

• Compatible with J cylinders
• Maximum cylinder diameter: 235mm
• Brackets colour: Grey
• Overall dimensions (WxDxH): 435 x 126 x 88mm