Treadnought Hybrid Nurse Call System Floor Sensor Mat

For patients at risk of falls and wandering, the use of a reliable, long-lasting and discreet floor sensor mat is crucial to ensuring their safety. The Treadnought Hybrid Nurse Call System Floor Sensor Mat can be used either wirelessly or with wired nurse call systems to instantly alert carers to a fallen or wandering patient, and is best used when placed at a bedside or in a threshold or doorway.

This Floor Sensor Mat is available with a range of connection types for use with different nurse call systems. You can select your desired connection using the drop-down menu above.

What's Included?

• 1 x Fall Savers Sensor Mat
• 1 x Pigtail connection lead (if selected from the drop-down menu above)

How Does the Treadnought Mat Detect Falls or Wandering?

The Treadnought Nurse Call System Floor Sensor Mat is activated when a patient steps onto the mat or applies pressure to it. This sensor mat is compatible with most call systems. When plugged into a nurse call system or alarm monitor, the Treadnought Nurse Call System Floor Sensor Mat provides a safe, hard-wearing and versatile solution to falls prevention challenges.

Durable and Built to Last

Floor mats can be an expensive repeat purchase for care homes, hospitals and other facilities where falls prevention is of great importance. The Treadnought Nurse Call System Floor Sensor Mat outlasts other floor mats because of its quality of construction and rugged, durable surface, providing superb value for money.

Where Can I Place the Fall Sensor Mat?

On carpeted surfaces, the Treadnought Nurse Call System Floor Sensor Mat can be placed directly onto the floor and connected to your existing system for immediate wander alerts. An optional Anti-Slip Mesh Mat can be purchased if the floor mat is being placed on a hard surface, such as tiles or lino, to prevent migration of the mat.

How Do I Use the Treadnought Mat Wirelessly?

If you prefer to use this mat wirelessly, up to two mats at once can be easily connected to eliminate tripping hazards and make the system more user-friendly. To use the system wirelessly, you will need the following components

• Treadnought Hybrid Nurse Call Sensor Mat (this product) – To detect when a patient steps or falls on your desired placement area
• Fall Savers Wireless Floor Pad Transmitter – To send the signal from the mat to the monitor
• Fall Savers Wireless Fall Prevention Monitor – To read the signal and alert care staff of the detected step or fall

Full Nurse Call System Compatibility

This Floor Sensor Mat is designed to work in as many facilities as possible, and is compatible with most nurse call systems. Multiple pigtail connection types are available, which can be selected from the drop-down menu at the top of the page.

From left to right, the connection types in the image above are listed below (the top left of the image shows the male/female pigtail connection via which each of these plugs connects to the Treadnought Mat)

• Leftmost: 4-Pin RJ9 - MED4 (TN05)
• Second from Left: 6-Pin RJ12 - MED6 (TN06)
• Middle: REV BT (TN08)
• Second from Right: Stereo Jack (TN03)
• Rightmost: Mono Jack (TN02)

Safe and Hygienic

Hygiene is a central concern in any medical environment, and this mat has been designed with this in mind. It is made with antibacterial materials, reducing the risk of contamination or spread of infection. It is easily cleaned with a vinyl-tolerant cleaning solution, though it should not be completely immersed in liquid.

Mat Dimensions

The dimensions of the Treadnought Nurse Call System Floor Sensor Mat are 91 x 61cm. This will cover a large enough area to avoid overstepping, and will fit into the vast majority of bedroom environments.

Dimensions and Specifications

• Dimensions (LxWxD): 600 x 900 x 7mm
• Minimum weight to trigger alert: 2kg